Origin Energy’s 650MWh Mortlake BESS begins commercial operations in Australia

LinkedIn
Twitter
Reddit
Facebook
Email

Origin Energy has confirmed that its 300MW/650MWh Mortlake battery energy storage system (BESS) in south-west Victoria has commenced commercial operations, following completion of major commissioning works.

Origin Energy is one of Australia’s largest energy companies, operating as both a generator and retailer across electricity, gas and renewable energy.

The Mortlake facility is located at the site of Origin’s existing Mortlake Power Station, around 200km west of Melbourne, and connects directly to AusNet’s 500kV switchyard through a dedicated substation.

The AU$400 million (US$279 million) project was first announced by Origin in January 2024, with construction beginning that August. Fluence served as the main contractor for the build.

This article requires Premium SubscriptionBasic (FREE) Subscription

Try Premium for just $1

  • Full premium access for the first month at only $1
  • Converts to an annual rate after 30 days unless cancelled
  • Cancel anytime during the trial period

Premium Benefits

  • Expert industry analysis and interviews
  • Digital access to PV Tech Power journal
  • Exclusive event discounts

Or get the full Premium subscription right away

Or continue reading this article for free

The facility uses grid-forming inverter technology, distinguishing it from conventional grid-following battery systems through its ability to set its own internal voltage waveform reference and operate independently of other generation sources when required, allowing it to actively stabilise the grid in a manner similar to synchronous generators.

However, it should be noted that grid-forming inverter-equipped battery storage systems have not yet been confirmed to meet the highest tier of system strength requirements in the NEM, according to the Australian Energy Market Operator (AEMO).

This hasn’t stopped the technology from becoming a core pillar of battery storage systems in Australia, with grid-forming inverters featuring in 74% of Australia’s 33.2GW NEM battery storage pipeline.

From commissioning to commercial operation

The commercial launch follows a formal testing process that began in early 2026. The system, designated MLB01 in the AEMO registry, entered AEMO’s Market Management System in March 2026, marking its transition into low-load injection and consumption testing to verify integration with Victoria’s transmission network.

That step followed Origin’s completion of unconditional connection agreements with AEMO in November 2025, which provided the regulatory certainty needed to proceed through the project’s final construction phases after satisfying the technical assessments and grid-impact studies required for safe integration.

Mortlake’s location also adds to a growing concentration of grid-scale battery storage in western Victoria, sitting roughly 30km northwest of the 100MW/200MWh Terang BESS.

The clustering of large battery storage systems in the region reflects both the availability of established transmission infrastructure at legacy generation sites and the value grid-forming assets provide in areas of the network where synchronous generation is being phased out.

For Origin Energy, Mortlake represents a shift in how the company uses its existing generation assets, pairing battery storage with sites that already have grid connections built for thermal power stations.

The approach reduces the cost and lead time associated with new transmission infrastructure, a factor increasingly shaping where large-scale battery storage projects are sited across the NEM as developers compete for connection capacity in areas with adequate network headroom.

Never miss an Australian energy storage story. Sign up for our Australia newsletter and get the latest project announcements, policy updates and market analysis delivered directly to you.

Solar Media (part of Informa Group) will host the Battery Asset Management Summit Australia 2026 on 25-26 August at the Amora Hotel Jamison in Sydney, bringing together asset owners, operators, trading teams and optimisers to address revenue strategy, lifecycle management and operational performance across Australia’s fast-growing battery storage fleet.

Readers of Energy-Storage.news can get 20% off their tickets using the code ESN20 at checkout. Find out more about the Summit on the official website.

15 September 2026
San Diego, USA
You can expect to meet and network with all the key industry players again in 2025 from major US asset owners, operators, RTOs and ISOs, optimizers, software and analytics providers, technical consultancies, O&M technology providers and more.
15 September 2026
Berlin, Germany
Launching September 2026 in Berlin, Energy Storage Summit Germany is a new standalone event dedicated to Germany’s energy storage market. Bringing together investors, developers, policymakers, TSOs, manufacturers and optimisation specialists, the Summit explores the regulatory shifts, revenue models, financing strategies and technology innovations shaping large-scale deployment. With Germany targeting 80% renewables by 2030, it offers a focused platform to connect with the decision-makers driving the Energiewende and the future of utility-scale storage.
3 November 2026
Málaga, Spain
Understanding technology and supplier selection for Europe’s utility-scale PV market in 2027. PV ModuleTech Europe 2026 is a two-day conference that tackles these challenges directly, with an agenda that addresses all aspects of PV module, inverter and battery supplier selection; product availability, technology offerings, supply chain traceability, quality assurance, factory auditing, system reliability, and supplier bankability.

Read Next

September 10, 2026
Developer SMT Energy and Software-focused energy storage system integrator FlexGen have announced the start of operations of a 160MW/320MWh energy storage facility Houston, Texas, US.
September 10, 2026
Second-life battery energy storage system (BESS) firms B2U, Moment and Rebaba are advancing project operations in Texas, US compliance, and new financing in Europe, respectively.
September 10, 2026
Akaysha Energy’s Waratah Super Battery in Australia briefly reached its full rated output of 850MW on 7 September.
September 10, 2026
The venture-capital-style returns once available in Australia have disappeared, according to panellists at the Battery Asset Management Summit Australia 2026.
September 9, 2026
Utility Black Hills Energy has announced it will move forward with the construction of a 50MW/200MWh energy storage facility at its Pueblo Airport Generating Station (PAGS) in Colorado, US.